AEye Q3 2023 Earnings Call Transcript

Quartr
Provided by Quartr
November 9, 2023

There are 7 speakers on the call.

Operator

Day and thank you for standing by. Welcome to the AI Third Quarter 2023 Financial Results Conference Call. At this time, all participants are in a listen only mode. After the speakers' presentation, there will be a question and answer session. You will then hear an automated message advising your hand is raised.

Operator

Please be advised that today's conference is being recorded. I would now like to hand the conference over to AI's Communications Director, Jen Deitsch. Please go ahead.

Speaker 1

Good afternoon, and thank you for joining AI's Q3 2023 Earnings Call. With me today are Matt Fish, Chief Executive Officer and Conor Tierney, Chief Financial Officer. Earlier today, we announced our financial results for the Q3 2023. A copy of our press release can be found on our website at investors.ai.ai. Before we begin, I would like to remind participants that today's discussion may include forward looking statements As defined in the securities laws and regulations of the United States with reference to future events, future operating results or financial performance.

Speaker 1

Forward looking statements are based on our current expectations and assumptions regarding our business, the industry and other conditions. These forward looking statements are subject to inherent risks, uncertainties and changes in circumstances that are difficult or impossible to predict. Our actual results may differ materially from those contemplated by these forward looking statements. We caution you, therefore, against placing undue reliance on any of these forward looking statements. You can find more information about the risks, uncertainties and other factors in our reports filed from time to time with the Securities and Exchange Commission, including in our most recent periodic report.

Speaker 1

All information discussed today is as of November 9, 2023, and we do not intend and undertake no obligation In addition, today's discussion will include references to certain non GAAP financial measures. These non GAAP measures are presented for supplemental information purposes only and should not be considered as a substitute for financial information presented in accordance with GAAP. A reconciliation of the measures non GAAP financial measures to the most directly comparable GAAP measures in our earnings release. Now let me pass the call over to Matt.

Speaker 2

Thanks, Jen, and thank you all for joining us. On today's call, I will provide an update on the trends we are seeing in the LiDAR marketplace, Our progress with respect to quoting activities and share some news on our ForeSite Intelligent Sensing platform, which is receiving strong industry recognition. Since we rolled out our revised strategy in May, we have been relentlessly focused on ensuring we enter the automotive market With a differentiated and superior product that integrates seamlessly into OEM solutions and carries a price point That establishes AI as a major ADAS player. Based on our ongoing work and conversations with Continental, OEMs and other partners, we remain confident that AI has the right technology and the right model to successfully compete And win our fair share of business in the LiDAR space. Our technology, which has been endorsed by major players, Including Continental and NVIDIA stands out for its ability to deliver safety with long range detection at highway speeds.

Speaker 2

We are working closely with Continental and our subsystem vendors to continue driving down costs well below the $1,000 mark To ensure that our products are the most competitive in the market, our long standing partnership with Continental remains highly productive, And we are in the binding quote phase with our lead OEM target with a decision still expected by the end of this year. We are still in the running for the additional 5 RFQs that we have previously discussed, although some of the decision time lines for those opportunities have been pushed out in 2024. With RFQs typically ranging in size from $250,000,000 to more than $1,000,000,000 An award decision is a game changing opportunity for AI. While it is no secret that the LiDAR landscape is highly competitive, AI believes the market is shifting from a battle for the best technology to a battle for the best path to commercialization. We are seeing that OEMs are now being more cautious about the pace of their capital spend and adding advanced technologies like LiDAR to the mix right now.

Speaker 2

Although we're getting a clear signal from OEMs that LiDAR adoption will happen and it is moving forward just at a slower pace than expected. Given the drive toward commercialization and the slight delays we are seeing with OEM quoting timelines, We made the decision to optimize our operations and cost structure around the Automotive First strategy that was announced in May. We have implemented steps to further drive down costs by reducing headcount and cash burn, helping to extend our runway out to 2025. Connor will provide additional details on our go forward expense structure shortly. On the product front, We continue to be recognized for our innovative next generation products.

Speaker 2

I'm happy to report that last month, Our Foresight platform received Reuters' prestigious Automotive Drive Honors Award for Excellence. With the judges calling Foresight High performing, flexible, scalable and a critical enabling technology for the next generation of vehicles. We beat out several of our LiDAR peers in being recognized as an automotive innovator that is accelerating advanced safety features And software revenue opportunities for OEMs. We are also pleased to announce that Today, we have released a new Foresight automotive reference design, Foresight Flex. This compact low power design provides High performance lidar in a small form factor, giving OEMs the ultimate flexibility in bringing safety solutions to market.

Speaker 2

At half the height and 1 third the power consumption of our 1st generation Foresight design, this product offers easy integration Into the windshield, roof or grill. We anticipate AI's Foresight Flex We'll deliver the lowest in cabin lidar cost at volume in the industry. Over the past several weeks, we have been actively engaged in an OEM customer roadshow, demonstrating the industry leading Performance enhancements of our ForeSite architecture. Customer feedback has been incredibly positive, Underscoring that AI's technology is highly competitive. OEMs specifically note that our relationship with Continental is a key advantage, while also being impressed by our software defined capabilities and reliability potential, thanks to our superior semiconductor IP.

Speaker 2

With that, I'll hand it off to Conor for a summary of our financial performance.

Speaker 3

Thanks, Matt. Welcome, everyone. As Matt discussed earlier, AI has incredible and innovative technology solutions for its automotive customers. Our products are close to production ready and so are the OEMs and partners we serve. Going forward, we intend to focus the majority of our resources on commercializing our technology in the automotive market, while appropriately dialing back our research and development and non automotive market investments.

Speaker 3

In connection with this plan, we have realigned our operational and financial resources. I'll cover all the details in a couple of minutes, But the actions we are taking will significantly reduce our operating expenses, extending our runway out to 2025. Now turning to our Q3 financial results. I'm happy to report that during the quarter, we achieved our goal of reducing our cash burn by 50% Since the beginning of the year, 1 quarter earlier than anticipated. We also reduced our net cash burn by $2,700,000 from the prior quarter.

Speaker 3

3rd quarter revenues were $188,000 as compared to $571,000 in the prior quarter. This was mainly attributable to the timeline for certain industrial customer opportunities being pushed out and the team focusing their efforts on key automotive milestones. 3rd quarter GAAP operating expenses were $12,900,000 down 13% from the prior quarter, due primarily to our continued cost reduction initiatives. Non GAAP operating expenses were $8,500,000 down sequentially from $10,700,000 last quarter. We reported a 3rd quarter GAAP net loss of $17,000,000 Or $0.09 per share versus a GAAP net loss of $16,000,000 or $0.09 per share last quarter.

Speaker 3

The increase in GAAP net loss was mainly due to inventory write downs outside of our ordinary operations associated with the transition to certain higher grade automotive components as part of commercialization, which were partially offset by operating expense reductions. On a non GAAP basis, our net loss was $9,500,000 or $0.05 per share in the 3rd quarter compared to a non GAAP net loss of $11,700,000 or $0.07 per share in the prior quarter. The expense reductions we made in the 3rd quarter were the main reason we were able to meet our GAAP EPS loss guidance and beat our non GAAP EPS loss guidance We provided last quarter by $0.01 We continue to manage our cash carefully, and net cash used for operating activities Decreased to $11,200,000 in the 3rd quarter from $13,100,000 in the 2nd quarter. We closed the Q3 with $45,900,000 of cash, cash equivalents and marketable securities and no debt. As an additional source of liquidity, we have access to our equity line of credit facility.

Speaker 3

During the quarter, we also filed a shelf registration statement that allows us to raise up to $200,000,000 over the next 3 years. Since we have a healthy balance sheet and have continued to reduce Our operating expenses and cash burn, we have no immediate plans to raise additional capital. That said, given our pipeline of RFQs, We wanted to have the flexibility to raise capital in the future to support the seamless execution of contract wins. Now turning to our guidance for the Q4 of 2023. As part of our shift from research and development to commercialization, We plan to leverage Continental's automotive supply chains to scale our business.

Speaker 3

The beauty of our capital light business model Is that enables us to rely on our partners to assemble, promote and distribute our products, so we don't need to invest in manufacturing, sales and marketing and other operating expenses. Additionally, our model is based on licensing and royalties and allows us to rinse and repeat across automotive and then move into other markets by leveraging the foundation we have in place. To that point, we are discontinuing our existing industrial product line and will be dialing back support for this end market until we have sufficient scale in automotive, which is our largest and highest priority market. As a result, we expect to record a one time non cash charge in the range of $4,500,000 to $6,500,000 principally related to the write down of inventory and asset impairment charges. We also expect to incur a cash charge In the range of $2,000,000 to $2,500,000 related to the reduction in force we recently announced.

Speaker 3

We expect these measures Will result in annualized savings in the range of $7,000,000 to $8,000,000 Now turning to revenues. We anticipate 4th quarter revenues will be less than $100,000 primarily due to our focus on automotive. We expect 4th quarter GAAP EPS loss to be $0.10 reflecting inventory write downs, asset impairment charges And one time termination benefits related to the restructuring and non GAAP EPS loss to decrease to $0.04 due to the reduction of our workforce. We made some important decisions this quarter to align our operations with evolving business needs and to reduce fixed operating costs To extend our cash runway into 2025, we are bullish about the future and believe implementing the next phase of our Automotive First plan We'll position AI to optimize the significant opportunity we see with our OEM partners. With that, I'll pass it back to Matt to wrap things up.

Speaker 2

Thank you, Conor. As I said earlier, we believe the LiDAR industry is at an inflection point as we transition from a battle for the best technology to navigate this transition and to play a significant role in improving automotive safety over the long term for several reasons. First, our RFQ pipeline continues to be healthy. 2nd, our partnership with Continental is stronger than ever. And thanks to their partnership with the supply chain, we have and continue to make strides with significant cost down of our LiDAR product.

Speaker 2

We are in the binding quoting phase with our lead OEM. 3rd, our unique capital light Licensing based business model positions us for meaningful operating leverage as we ramp up sales and scale our business going forward. In the near term, it allows us to leverage our partners' manufacturing, supply chain, OEM relationships and sales teams to cost effectively bring our technology to market. Finally, our capital light model has enabled us to further rightsize our expense structure to extend our runway to 2025 without raising additional capital. In closing, I want to thank our team at AI for your hard work and dedication to executing our strategy every day, Continental for your collaborative partnership and our shareholders for your support and interest.

Speaker 2

With that, I will turn the call back to the operator for questions.

Operator

Thank you. At this time, we will conduct the question and answer session. Our first question comes from John Roy with Water Tower Research. Please go ahead.

Speaker 4

Hey, Matt and Connor. So this shift from R and D to commercial, can you guys provide any more detail about What's happening there and how that's really going to affect given your automotive first focus is really now where you're at?

Speaker 5

Absolutely. First of all, welcome back, John. Great to have you. So we talk about R and D, what we're talking about is the development of the foundation of our product. Okay.

Speaker 5

That's done. We're complete with that, and we feel that we're a strong contender in meeting The various requirements that are out there in the automotive industry. So what's next? That is the Series Production Award in the automotive space. And as we've talked about in some of the earlier earnings calls, there's 2 things we need to get done here.

Speaker 5

1 is Tie out from the customer through Continental to our sub suppliers that we have high confidence, low risk Ability to manufacture at scale with a reliable set of products, that's table stakes for the automotive business. And then the second part of this This is what we talk about when we say commercialization and this is a very heavily Engineering and operations driven activity. So going forward, this you can look at it as 80% of the company being focused on Engineering and operations activity think about the next 6, 12, 18 months as we drive to market. The other 20% is working on new features, enhancements and whatnot to go to the next generation of our products and this is where ForeSite Flex So this shift, if you will, was from developing the foundation of the product to Now engineering and operations very heavy focus in bringing that product to market.

Speaker 4

Great. So kind of maybe as a follow on, you were talking about how things are going well with Conte And our Qs, can you give us any more color on that, any more details? I'm not asking to name names, but Any kind of color would be helpful.

Speaker 5

Absolutely. To sum it up, I believe our relationship with Continental is stronger than ever. So we talked earlier in the script about what is a binding quote. This is a very serious step In the automotive nomination process, it's actually the phase where the Tier 1 supplier, Continental in this case, has to vet Your supply chain top to bottom and make sign a very serious type of contract called a binding contract With the OEM, and this is the first time in AI's history that we've reached this level of maturity In automotive coating activity. So tremendous progress driven by the team and our partners at Continental over the summer here Since we've last spoken about it.

Speaker 5

So binding quote, that's key part number 1. The second is, We talked about 6 RFQs. We're still in the running for all of those. We haven't lost any of those potential nominations. But As I mentioned earlier, some of those have shifted out a little bit.

Speaker 5

As part of my own personal activity over the summer, I've been out in Europe And also with Big 3 in Detroit talking to ADAS leaders in the OEM space, every one of them Have the LiDAR program. And it's just a question of timing, summer in 'twenty six, summer winding up in 'twenty seven, varying times of when those nominations are going to be given and this is what I said earlier, we're seeing firsthand evidence that every major OEM we've spoken with Has LiDAR on the roadmap. That's good news.

Speaker 4

Great. Thanks so much, Matt.

Speaker 5

Thank you, sir. Good to hear from you.

Operator

Thank you. One moment for our next question. Our next question comes from Kevin Garrigan with Westpark Capital. Please go ahead.

Speaker 6

Yes. Hey, good afternoon, Matt and Connor, and thanks for taking my questions. I was wondering if you can give us a little more color on Time line for the Foresight Flex. I think you noted in the press release it's going to be available in 2024. So just wondering on the Time line for shipment of samples and any other color you can kind of give.

Speaker 5

Great. We get cut right to the chase on that and good to hear from you, Kevin. Eight samples next year.

Speaker 6

Okay, perfect. And can you give us any details on the manufacturing of the ForeSite Flex? Are you going to be using Tier 1 partners such as Continental?

Speaker 5

We plan to continue to use that model, Kevin. And look, I think one of the things that's Incredibly important to continuous scale in the automotive industry is to leverage existing supply chain. This is a really important point for us and our potential customers and our Tier 1 partner. It keeps the risk Manageable and also allows us to leverage economy scale through volumes. So very much think about reuse, high degree reuse, but We've got some engineering improvements and whatnot going into this next generation of design.

Speaker 6

Yes, got it. Okay. Yes, that makes a ton of sense. And then just lastly, Are you guys seeing a lot of OEMs looking to integrate LiDAR systems behind the windshield instead of putting it on the grille or the roof line? And Any specific reason for that?

Speaker 6

I mean, is it just cheaper because you don't have to redesign the car?

Speaker 5

Yes. Look, I think I can tell you a bit of anecdotal data from my own Total data from my own trips and meetings with OEMs over the summer. Look, it's kind of a mixed bag and this is actually One of the reasons why we announced Foresight Flex here today, because we are seeing the need Different OEMs, different vehicle lines make different design choices. Some are okay with the bump on the roof, others want to tuck it behind the grill and you can That's, say, with cars that are higher up off the ground. And there are a number of technical advantages to have something behind the windshield.

Speaker 5

It's easier to manage thermally in a number of ways, but it really depends. This is one of the beauty Of the automotive industry, there's so much variety. And this is what drove us to build a product that's a lot more flexible and being able to integrate in the windshield and other places as well.

Speaker 6

Okay, perfect. That's all for me. Thanks guys and congrats on the progress.

Speaker 5

Thanks, Jeff.

Operator

Thank you. I'm showing no further questions at this time. I'd now like to turn it back to Matt Fish for closing remarks.

Speaker 5

Thank you for joining us today, and we look forward to updating you in the coming months, and please do not hesitate to reach out to us with any questions. Take care.

Operator

Thank you for your participation in today's conference. This concludes the program. You may now disconnect.

Remove Ads
Powered by Quartr
Earnings Conference Call
AEye Q3 2023
00:00 / 00:00
Remove Ads