Tesla Q2 2024 Earnings Call Transcript

There are 6 speakers on the call.

Operator

Ladies and gentlemen, thank you for standing by. Welcome to the Eltek Limited 20 24 Second Quarter Financial Results Conference Call. All participants are present in a listen only mode. Following management's formal presentation, instructions will be given for the question and answer session. As a reminder, this conference is being recorded.

Operator

Before I turn the call over to Mr. Eli Yaffe, Chief Executive Officer and Ron Freund, Chief Financial Officer, I would like to remind you that they will be referring to forward looking information in today's presentation and in the Q and A. By its nature, this information contains forecasts, assumptions and expectations about future outcomes, which are subject to risks and uncertainties outlined here and discussed more fully in Eltek's public disclosure filings. These forward looking statements are projections and reflect the current beliefs and expectations of the company. Actual events or results may differ materially.

Operator

We'll also be referring to non GAAP measures. Heltech undertakes no obligation to publicly release revisions to such forward looking statements to reflect events or circumstances occurring subsequent to this date. I will now turn the call over to Mr. Eli Yaffe. Mr.

Operator

Yaffe, please go ahead.

Speaker 1

Thank you. Good morning. Thank you for joining us for 2024 Second Quarter Earnings Call. With me is Ron Freund, our Chief Financial Officer. We will begin by providing you with an overview of our business and summary of the principal factors that affected our results during Q2 2024.

Speaker 1

After our prepared remarks, we will be happy to answer any of your questions. By now, everyone should have access to our press release, which was released earlier today. The release will be also available on our website. Today, I'd like to address 2 key areas, revenues and operations. I will start with revenues.

Speaker 1

Since the beginning of 2023, we have demonstrated consistent growth driven by high demand for our products, timely workforce expansion and ongoing investment in machinery and infrastructure. We actually forecast increased demand and initiate an accelerated investment plan in early 2022, which has already enhanced our capacity and will continue to do so through the end of 2025. However, in this quarter, we experienced decrease in revenue and profit compared to the previous period. This decline is primarily due to the significant timing shift of some of our key customers who prioritize orders for PCB with medium technology requirements resulted in lower price and margins. We did not succeed to maintain our profitable mix from the prior period and orders and more complex higher margin PCB were pushed to the end of Q2 2024 and Q3 2024.

Speaker 1

Moreover, as mentioned in the previous call, our current bottleneck is manpower. During the Q2, we continue to face production delays due to the manpower related capacity constraints. During the quarter, we had 59 working days compared to 6290 days in Q2 2023, a decrease of 5%. The shortage of manpower and decrease in workdays prevent us from producing and delivering some of the high margin PCB orders we had on ends for Q2 delivery. This unfavorable mix had negatively impact our short term financial performance.

Speaker 1

We finished Q2 with $10,500,000 in revenue, gross profit of $1,600,000 and gross margin of 16%. As mentioned earlier, the lower gross margin for the quarter is attributable to the product mix. Manufacturing cost remains consistent with the previous quarters, but the average sales price was lower leading to decline in gross margin. We remain confident in our long term strategy and market position. We expect to return to profitability parameters of previous quarters in Q3 and Q4 2024 as product mix strategies are realigned.

Speaker 1

As of today, our backlog has increased by 30% since the beginning of 2024. This increase highlights our need to increase capacity immediately, primarily by growing our workforce which we'll discuss later. Increasing backlog is due to the strong defense sector demand related to the current situation in our area and the shift back of manufacturing from the East. These two factors are major influence in our backlog and future revenues. We estimate that we have not yet seen the full impact of the regional conflict and we anticipate further increase in the defense sector demand for our products in the coming quarters.

Speaker 1

We continue to focus on securing long term orders rather than short term orders. We have also decided that in spite of the high defense sector demand, we will continue to allocate enough capacity to meet the demand of our high end industrial and medical sectors and we will try to keep the mix of the service segment as before. I will now discuss our accelerated investment plan and our action to deal with the management issue with the manpower issues. We are continuing our accelerated investment plan with a significant focus on 3 new quoting lines. The first coating line which called Via Fill Line is already installed and operational.

Speaker 1

During the quarter we reviewed the status of our suppliers and confirmed that the installation of the remaining two coating lines will be installed by the end of 2025. These new lines will increase our capacity, enable the production of more advanced technological products and improve yields. We are currently in the middle of the transition office space within our building to accommodate the required construction for the remaining two coating lines. By the end of the second quarter, we had issued purchase order to all the components of the plan. The balance of payment forecast through the end of 2025 is approximately $8,000,000 It's important to note that as mentioned previously, this investment is in addition to our regular capital expenditure, which range from $2,000,000 to $3,000,000 per year.

Speaker 1

Regarding Manpower, we are navigating the challenging market with the strong demand for employees. In response to this demand and our forecast for the increased order flow, we have adjusted our recruitment policy, primarily by increasing direct labor salaries. This action have already had positive effect and we are now increasing our workforce daily. Our plan is to add about 50 new employees in the coming months and to extend our manufacturing capacity to include an extended sales shift. We expect these measures to help us to meet delivery schedule, accelerate delivery dates and increase revenue.

Speaker 1

I will now turn the call over to Ron Pointe, our CFO to discuss our financial results.

Speaker 2

Thank you, Eli. I would like to draw your attention to the financial statements for the Q2 of 2024. During this call, I will also discuss certain non GAAP financial measures. Eltek uses EBITDA as a non GAAP financial performance measurement. Please see our earnings release for its definition and the reasons for its use.

Speaker 2

I will now go over the highlights of the Q2 of 2024. All numbers mentioned are in U. S. Dollars. Revenues for the Q2 of 2024 were $10,500,000 compared to $11,000,000 in the Q2 of 2020 3.

Speaker 2

Gross profit reached $1,600,000 compared to a gross profit of $3,000,000 in the Q2 of 2023. The decrease is due to the decrease in revenue and the unfavorable mix of products sold. Operating profit amounted to $400,000 in Q2 2024 compared to $1,400,000 in Q2 2023. We recorded financial income of $500,000 during Q2 2024, including income from the devaluation of the NIS against the US dollar and interest on our interest bearing bank deposits. Net profit was $800,000 or $0.11 per share in Q2 2024 compared to net profit of $1,300,000 or $0.22 per share in Q2 2023.

Speaker 2

EBITDA was $800,000 compared to $1,700,000 in Q2 2023. During the Q2 of 2024, we enjoyed positive cash flow from operating activities of $1,800,000 As of June 30, 2024, we had cash and cash equivalents and short term bank deposits of $18,300,000 with no debt outstanding. We are now ready to answer your questions.

Operator

Thank you. The first question is from Tom Keay of Zacks. Please go ahead.

Speaker 3

Good morning. Can you explain in more detail the timing shift by these customers that go to medium technology? What specific reason would they shift to medium technology PCBs instead of traditional complex PCBs?

Speaker 2

The reason for this unfavorable mix was timing of production that was required by our customers for lower technology than the regular mix. And that's said we produced more than 40% of rigid instead of the average of 30%. And it was time, it was requirement by our customers and usually we try to support our customers and change the manufacturing plan according to their requirements.

Speaker 3

Okay. And you indicated it will return to more complex PCBs in the 3rd Q4. Will that mean the traditional gross margin of 27% will be returned?

Speaker 1

Yes. Hi, Tom, it's Eli. Yes, we'll return to the 27% for long term. And as I mentioned before, some of the high end PCB were pushed to the end of Q2 and toward Q3 of 2024.

Speaker 3

Got it. And I noticed that capital expenditures were $5,900,000 dollars for the quarter. Is that all related to the accelerated investment program?

Speaker 2

Most of it.

Speaker 3

Most of it? And what can we

Speaker 4

expect that in

Speaker 3

the next?

Speaker 2

Just one correction, the $5,900,000 is for the 6 months, not the quarter. In the quarter, we invested $3,000,000

Speaker 3

Okay. Sorry, I thought that was the other one. So where do you expect that on the second half of the year in terms of capital expenditures?

Speaker 2

So as we said, it depends mainly on the timing of installation of machines and delivery. We have a balance of about $8,000,000 regarding the accelerated investment plan to be paid during the rest of 2024 2025. I estimate that during the next half year we'll spend somewhere around $2,000,000

Speaker 3

Okay, so much of that will be in 2025 then, Michele?

Speaker 2

Yes.

Speaker 3

And one more, are you guys still looking for a presence in North America? Any progress on that?

Speaker 2

Yes. We are still looking for a suitable target company. We cannot tell something about it. It hasn't reached a stage that we will report something, but we are working with this issue also.

Speaker 3

Okay. Thank you. I'll jump back in the line. Thank you.

Operator

The next question is from Michael Wu. Please go ahead.

Speaker 5

Hi. First of all, would you mind to disclose the percentage of the revenue mix for the defense sector?

Speaker 1

The defense sector is approximately 60% was 60% in Q3 Q2, 2024.

Speaker 5

So it's the same, right?

Speaker 1

Yes, it does not change. What will change is the mix of the product within the different sector.

Speaker 5

Okay. So I mean do you expect the Q4 Q3, Q4 will be the same, similar like revenue mix?

Speaker 1

No, the mix is going to change back to 30, 70 as we mentioned and not 40, 60 as it was in Q3 as it was in Q2, sorry.

Speaker 5

Okay. So it will go up a little bit, right?

Speaker 2

Yes, it will go up. It will

Speaker 1

go up. High margin PCBs will go up.

Speaker 5

Okay, great. About the CapEx from for the next one and a half year until the end of 2025, would you expect like the total CapEx would be around 10,000,000 dollars 12,000,000 ish? Yes.

Speaker 2

We expect that it will be around the $10,000,000

Speaker 5

Okay, great. Thank you. That's all my questions. Thanks.

Operator

The next question is from Tom Keay of Zacks. Please go ahead.

Speaker 3

Hi. Just one follow-up on the manpower issue. I couldn't quite hear it. The phone line was a little blurry. But did you say you'll be hiring 50 people?

Speaker 3

And maybe just explain the manpower issue one more time?

Speaker 1

Right now the current situation in the manpower labor market in Israel is very tough. So we increased in July 1 to increase salary of direct employees in LTAC. And by doing it we start to absorb more people to work with us. I'm speaking about direct employees and the plan is to increase the manpower by 50 people, 5 fold.

Speaker 2

And we are hoping to do it by the year end. It's a very tough market, but our steps shown performance. That means that once we raise the salaries of direct labor, we could recruit more employees and we are recruiting on a daily basis.

Speaker 3

And are those all primarily manufacturing employees or are there other areas?

Speaker 1

Manufacturing employees. Direct employees and manufacturing employees, yes.

Speaker 3

Great. Okay, thanks.

Speaker 1

Thank you, Tom.

Speaker 2

That's

Speaker 4

all I had.

Operator

The next question is from Ranzrou. Please go ahead.

Speaker 4

Hi, everyone. First question is regarding this potential future deal in North America, how do you going to finance these kinds of deals? Do you consider like future offering as you did in the $16 per share offering? Or do you consider financing with bank loan or change of shares? This is the first question.

Speaker 4

2nd question is, do you think that the changes in the mixture of PCB complex products that you can compensate on even the revenue and the profits, so that in the total year, you will reach your I don't know if it's target because you don't publish target, but to compensate even more for the 27 gross margin and for even higher revenue than previous quarters?

Speaker 2

Hi, Ryan. So in regard to your first question, any financing plan for the purchase will depend of course on the scope of acquisition and the form of financing that will be discussed and agreed between the parties. But at this point, our plans are to try and finance the purchase with the cash we have on hand and by raising debt. We do not intend at this stage to raise additional capital for this purchase.

Speaker 1

Regarding your second question, Ran, regarding the mix of product in Q2, as I said in our PR, the mix of the quarter contained more rigid technology requirement PCB that results lower prices and margins, but the average normal average is 30 percent rigid PCB and 70% rigid flex with high margins. But this quarter, in quarter 2 the mix was contained 42%, more precisely 42% of rigid PCB with low margin and 58% high end PCB with high margin and we agreed to receive and produce this order since we have long term relationship with our key customers. When there is a demand for change priorities, we support our customers and change our manufacturing plan accordingly. And that's the reason that we know that it was an event because of the situation in the defense sector in Israel and we support them. But for long term, we still forecast 27% gross margin.

Speaker 2

And as for the balance of the year, we don't give guidelines as you probably know. We believe that we will make better than this quarter and at this point, I will stop.

Speaker 4

Okay. Thank you.

Speaker 1

Thank you.

Operator

There are no further questions at this time. Before I ask Mr. Jaffe to go ahead with his closing statement, I would like to remind the participants that a replay of this call will be available tomorrow on the Web

Speaker 1

site. Mr.

Operator

Yacke, would you like to make a concluding statement?

Speaker 1

Before we conclude, I want to express my gratitude to our employees and their unwavering dedication and executing our strategy. I also extend my thanks to our customers, partners and investors for their ongoing support. Thank you all for joining today's call. Have a great day.

Operator

Thank you. This concludes the Eltek Limited 20 24 Second Quarter Financial Results Conference Call. Thank you for your participation. You may now go ahead and disconnect.

Remove Ads
Earnings Conference Call
Tesla Q2 2024
00:00 / 00:00
Remove Ads